WaDaYaNeed? Promotional Products? Logo

Item#: 600-17

Custom Imprinted Enginerring Rulers And Gauges!
  • Silver Logo Decimal Back
  • Silver Logo Metric Back
  • Silver BLank Custom Back
  • Silver Logo Optional Heat Sealed Vinyl Cases
QuantityPrice Each:
100$5.91
250$3.75
500$3.12
1000$2.84
2500$2.69
5000$2.60
Larger QuantitiesCall for discount!
(800) 958-4332

Custom Pocket Ruler w/32nds & 16ths Over Mm (6.25"x.4687")



Item Number:

600-17

Description:

Description: Rulers used for general measuring. Can also be used as a depth gauge with sliding pocket clip. 6.25" L x .4687" W Available with Engineering Scale

Colors:

Silver

Size:

6.25" L x .4687" W

Imprint Area:

5.5" L x .125" H on front

Setup Charge:

$40.00

Price Includes:

Etched
1 color, 2 sides

Production Time

14 to 20 working days


Additional Information:

This item is made in the USA.

Ships from: US

We will custom imprint these Enginerring Rulers And Gauges with your logo!

Prices valid through 12/31/22.


Category:

Rulers, Measuring Devices

Keywords:

0.020 Stainless Steel, Spring Tempered, Attached Sliding Pocket Clip, Rounded End, Metric, Decimal

Themes:

Handyman

Item#: 600-18

Custom Imprinted Enginerring Rulers And Gauges!
  • Silver Logo Decimal Back
  • Silver Logo Metric Back
  • Silver Blank Custom Back
  • Silver Logo Optional Heat Sealed Vinyl Cases
QuantityPrice Each:
100$5.91
250$3.75
500$3.12
1000$2.84
2500$2.69
5000$2.60
Larger QuantitiesCall for discount!
(800) 958-4332

Custom Pocket Ruler w/32nds Over Mm (6.25"x.4687")



Item Number:

600-18

Description:

Rulers used for general measuring. Can also be used as a depth gauge with sliding pocket clip. 6.25" L x .4687" W Available with Engineering Scale

Colors:

Silver

Size:

6.25" L x .4687" W

Imprint Area:

5.5" L x .125" H on front

Setup Charge:

$40.00

Price Includes:

Etched
1 color, 2 sides

Production Time

14 to 20 working days


Additional Information:

This item is made in the USA.

Ships from: US

We will custom imprint these Enginerring Rulers And Gauges with your logo!

Prices valid through 12/31/22.


Category:

Rulers, Measuring Devices

Keywords:

0.020 Stainless Steel, Spring Tempered, Attached Sliding Pocket Clip, Rounded End, Metric, Decimal

Themes:

Handyman

Item#: 700-00

Custom Imprinted Enginerring Rulers And Gauges!
  • Silver Logo Conversion Table Back
  • Silver Logo Decimal Equivalents Back
  • Silver Blank Custom Back
QuantityPrice Each:
100$6.20
250$4.42
500$3.84
1000$3.56
2500$3.36
5000$3.27
Larger QuantitiesCall for discount!
(800) 958-4332

Stainless Steel Ruler (6.75"x.75") w/mm over 32nds &16ths/Conversion Table Back



Item Number:

700-00

Description:

Ruler used for general measuring. 6.75" L x .75" W Available with Engineering Scale

Colors:

Silver

Size:

6.75" L x .75" W

Imprint Area:

5.75" L x .25" W on front

Setup Charge:

$40.00

Price Includes:

Etched
1 color, 2 sides

Production Time

14 to 20 working days


Additional Information:

This item is made in the USA.

Ships from: US

We will custom imprint these Enginerring Rulers And Gauges with your logo!

Prices valid through 12/31/22.


Category:

Rulers, Measuring Devices

Keywords:

Measuring Tool, 0.020 Spring Tempered, Millimeter, Inch Scale, Conversion Table, Decimal Equivalent

Themes:

Carpentry, Construction, Handyman

Item#: 3250

Custom Imprinted Enginerring Rulers And Gauges!
QuantityPrice Each:
100$14.36
250$13.40
500$12.96
1000$12.44
Larger QuantitiesCall for discount!
(800) 958-4332

12" Engineer Drafting Scale Ruler



Item Number:

3250

Description:

Aluminum 12" engineer standard solid triangular scale is made from high quality extruded aluminum with ultra smooth edges and photo anodized calibrations making them a permanent part of the aluminum that will never wear or rub off. Calibrations are 10, 20, 30, 40, 50 and 60 parts per inch. 12" L

Colors:

Silver, Gold, Purple, Red, Blue, Green, Black

Size:

12" L

Imprint Area:

0.1875" W x 0.75" H on 8 Divisions
0.25" W x 11" H on side (blank)

Setup Charge:

$50.00

Price Includes:

Photo Anodized
1 color, 1 side
$30.00 setup for additional colors.
Additional run charges may apply.

Production Time

Approximately 20 working days or 7 to 10 working days for rush service


Additional Information:

Ships from: US

We will custom imprint these Enginerring Rulers And Gauges with your logo!

Prices valid through 12/31/22.


Category:

Rulers, Drafting Instruments

Keywords:

Engineer, Part Per Inch, Solid, Rectangle, Triangle End, Aluminum, Calibration, Standard, Numbered, Triangle Edge, Lined, Drafting Scale, Inch Scale, Metal

Themes:

Carpentry, Construction, Handyman

Item#: 3331

Custom Imprinted Enginerring Rulers And Gauges!
QuantityPrice Each:
100$12.72
250$11.76
500$11.28
1000$10.52
Larger QuantitiesCall for discount!
(800) 958-4332

12" Engineer Scale 4 Bevel Ruler



Item Number:

3331

Description:

Aluminum 12" 4 bevel engineer scale is made from high quality extruded aluminum with ultra smooth edges and photo anodized calibrations. Will draw lines that are smooth and tick-free. Professionals will be pleased to own and use this quality scale. Calibrations are 10, 20, 30 and 50 parts per inch. 12" L

Colors:

Silver, Gold, Purple, Red, Blue, Green, Black

Size:

12" L

Imprint Area:

1/2" W x 10" H

Setup Charge:

$50.00

Price Includes:

Photo Anodized
1 color, 1 side
$30.00 setup for additional colors.
Additional run charges may apply.

Production Time

Approximately 20 working days or 7 to 10 working days for rush service


Additional Information:

Ships from: US

We will custom imprint these Enginerring Rulers And Gauges with your logo!

Prices valid through 12/31/22.


Category:

Rulers, Drafting Instruments

Keywords:

Engineer, 4 Bevel, Rectangle, Aluminum, Calibration, Lined, Number, Rounded Edge, Inch Scale, Metric Scale, Metal

Themes:

Carpentry, Construction, Handyman

Item#: 3699

Custom Imprinted Enginerring Rulers And Gauges!
QuantityPrice Each:
100$16.08
250$15.32
500$14.88
1000$14.36
Larger QuantitiesCall for discount!
(800) 958-4332

6" Drafting Fan Ruler (Architect/Engineer/Metric/Inch)



Item Number:

3699

Description:

Drafting fan with architect, engineer and metric scales. Aluminum 6" drafting fan is made from high quality extruded aluminum with ultra smooth edges. Architect calibrations are 1/32, 1/16, 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 3/4, 1, 1 1/2 and 3. Engineer Calibrations are 10, 20, 30, 40, 50 and 60. Metric calibrations are 1:1, 1:2, 1:5, 1:10, 1:20 and 1:50. 6" L

Colors:

Silver

Size:

6" L

Imprint Area:

1/2" W x 6" H on top Blade

Setup Charge:

$50.00

Price Includes:

Photo Anodized
1 Color, 1 Side
$30.00 setup for additional colors.
Additional run charges may apply.

Production Time

Approximately 20 working days or 7 to 10 working days for rush service


Additional Information:

Ships from: US

We will custom imprint these Enginerring Rulers And Gauges with your logo!

Prices valid through 12/31/22.


Category:

Rulers, Drafting Instruments

Keywords:

Fan, Architect, Engineer, Metric Scale, Inch Scale, Calibrate, Aluminum, Ruler, Measurement, Lined, Number, Rounded Edge, Swivel, Metal, Rectangle, Center Finding Tool

Themes:

Carpentry, Construction, Handyman

Item#: 3630

Custom Imprinted Enginerring Rulers And Gauges!
QuantityPrice Each:
100$10.52
250$10.08
500$9.36
1000$8.60
Larger QuantitiesCall for discount!
(800) 958-4332

12" Combination Hollow Triangular Drafting Scale Ruler



Item Number:

3630

Description:

Combination architect / engineer triangular hollow scale. Aluminum 12" combination hollow drafting scale is made from high quality extruded aluminum with ultra smooth edges and photo anodized calibrations making them a permanent part of the aluminum that will never wear or rub off. Calibration: A-16 & (1/8, 1/4), E-10 & 50, M - 1:100 & 1: 500. 12" L

Colors:

Silver, Gold, Purple, Red, Blue, Green, Black

Size:

12" L

Imprint Area:

5/16" W x 9" H on side

Setup Charge:

$50.00

Price Includes:

Photo Anodized
1 color, 1 side
$30.00 setup for additional colors.
Additional run charges may apply.

Production Time

Approximately 20 working days or 7 to 10 working days for rush service


Additional Information:

Ships from: US

We will custom imprint these Enginerring Rulers And Gauges with your logo!

Prices valid through 12/31/22.


Category:

Rulers, Drafting Instruments

Keywords:

Hollow, Rectangle, Ruler, Construction, Triangle End, Aluminum, Calibration, Metric Scale, Architect, Engineer, Triangular Drafting Scale, Wear Resistant, Professional, Read Plan, Inch Scale, Metal

Themes:

Carpentry, Construction, Handyman

We're Here to Help

For fastest service, please call us toll-free at 1-800-958-4332.

Our friendly, knowledgeable staff are ready to assist you with the entire order process!

Sales & Promotions

More Sales & Promotions!

Words From Our Customers

More Kudos!
Loading…